Spengler-Holtex Oxystart Digital Pulse Oximeter is an easy-to-use oximeter with LCD display, providing high-performance measurement for on-the-go use.
It displays :
- oxygen saturation (SpO2), with a resolution of 1% and an accuracy of around 2% when saturation is between 70% and 100% ;
- heart rate, over a range from 30 bpm to 250 bpm (resolution is 1 bpm) with an accuracy of around 2 bpm;
- plethysmography curve.
Contains :
- 1 oximeter,
- 1 wrist strap,
- 2 LR03 batteries,
- 1 case.
Warranty: 2 years.
How to use Spengler-Holtex Oxystart Digital Pulse Oximeter
Read instructions before use.
Test subjects must not wear nail varnish or any other make-up. The subject's fingernails must not be too long.
Continued use of the device may cause discomfort or pain, particularly for people with microcirculation disorders. It is recommended not to leave the sensor on the same finger for more than 2 hours.
The light emitted by the device is harmful to the eyes. Do not stare.
Risk of explosion - Do not use the oximeter in an environment containing flammable gases such as certain flammable anesthetic agents.
Storage environment :
- Temperature: -40°C-+60°C
- Relative humidity: ≤ 95%
- Atmospheric pressure: 500 hPa-1060 hPa.
Environment of use :
- Temperature: 10°C-40°C
- Relative humidity: ≤ 75%
- Atmospheric pressure: 700 hPa-1060 hPa.
Keep away from dust, vibration, corrosive substances, explosive materials, high temperatures and humidity.
Français
English
